Show vlan commands
- show interface vlan
- show interface vlan 1
- show interface vlan aruba
- show interface vlan juniper
Cisco show interface vlan
Show interface vlan command cisco!
Displaying a switch VLAN configuration
Customizing the show VLANs output (CLI)
Syntax
[]
Specifies the order you want information to display for the command.
Displays information for one port or a range of ports. If is not specified, all ports display.
Fields that can be included in the customized display:
| Field | Display | Example | Default width |
|---|---|---|---|
| id | VLAN id | 5 | 6 |
| name | VLAN name | Vlan55 | 32 |
| status | Status | Port-based | 10 |
| voice | Voice enabled | No | 5 |
| jumbo | Jumbos enabled | No | 5 |
| ipconfig | How the IP address was configured | Manual Disabled DHCP/BootP | 10 |
ipaddr (IPv4) ipaddr (IPv6) | The IP addresses | 10.10.10.3 fe80::212:79ff:fe8d:8000 | 15 for IPv4 46 for IPv6 |
| ipmask | The subnet masks | 255.255.255.6 /64 (prefix for IPv6 is in format "/XX") | 15 |
| proxyarp | Whether proxy ARP is configured | No | 5 |
| localproxyarp | Whether local proxy ARP is configured | No | 9 |
| state | "Up" if at least one port is up | Up | 5 |
Customizing the VLAN display
The following example displays at its default width and allows up to 20 charact
- show interface vlan trunk
- show interface vlan ip address